Do I Need to Upgrade My Panel for EV Charger in Bloomington, CA?

If you have an EV and don’t have a way to charge it at home, it is likely a big priority to get a charger installed. This can range from a small plug in to a large electrical upgrade to your home. It all depends on whether or not you have a 240-volt circuit in your garage or not. If you do not, this is a larger job, and you will need a licensed electrician to do the job for you. Not only that, but it raises the question, you do you need a panel upgrade as well? Howell Electric is here to talk about EV charger installations and what that could mean for your panel as well.

Check Your Panel’s Amperage

The first thing that an electrician will look at when they are getting ready to install an EV charger in your home, they will take a look at your panel first. They will be making sure it can handle the electrical upgrade. Here are the different types of panels and what they can handle.
– 200-Amp Panel: If you have a 200-amp panel, you are in a good place. Most 200-amp panels are designs to keep modern homes and their electrical demands taken care of. This would include an EV charger.
– 100-Amp Panel: If your home was built more than 20 years ago, chances are, that you have a 100-amp panel. This was the standard in homes for many decades. However, this panel, while it might be able to handle an EV charger, would more than likely struggle to power modern appliances as well as an EV charger as well.
– 60-Amp Panel: If you have a 60-amp panel, you will definitely need an upgrade before you will be able to have an EV charger installed. If you upgrade to a 200-amp panel, it will make it so your home is safer and has plenty of power to electrify your home.

Other Panel Considerations

There are other panel considerations that must be made as well before installing an EV charger.
– Electrical Loads: An electrician will do a load calculation to make sure your electrical panel can handle the electrical load your home requires to stay running. If it is too much for a 100-amp panel, then they will likely recommend an upgrade.
– Circuit Slots: There must be an empty slot in your panel where a new circuit can be added for the charger as well. You will need two slots for a 240-volt circuit.
– Warning Signs: If you have problems already with flickering lights, tripped breakers, and outlets that aren’t working properly, that will be considered as well.

Residential Electricians & Commercial Electrical Contractors in Yucaipa, Rancho Cucamonga, Colton, Rialto, Bloomington, Lytle Creek & Fontana, CA | San Bernardino County California

If you need a EV charger installed in your home, there is no one that can handle the job better than the experts at Howell Electric. We will make sure it is done right and done safely. Call us today!